Zigbee gateway serves as the core device in a Zigbee network. Zigbee devices can be added to the network through this gateway to implement communication with other Zigbee devices. The gateway is connected to the router through Wi-Fi or network cable to communicate with the cloud and mobile apps, and Zigbee devices can be viewed and controlled through the app.
Scenarios
Smart living
With wireless and wired Zigbee gateway acting as a control hub, you can run local scenes or scenes set by Zigbee scene switch with one tap. Alternatively, you can use third-party smart speakers to implement smart device functions and scenes. For example, when the light sensor detects brightness increases, curtains automatically open. When the alarm goes off, other linked devices start to work.
Media life
When you enable the media mode, smart devices including lights, curtains, and switches will run the preset scenes accordingly. If you are not at home, with the gateway, you can link the contact sensor with the siren alarm to trigger alarms of unexpected activities or the IP camera (IPC) for video capture. This smart linkage keeps your home safe.
Solution Benefits
Convenient networking
Users can connect multiple sub-devices simultaneously instead of doing it one by one. They can also connect sub-devices when there is no network connection.
Accidental deletion prevention
Under normal conditions, a sub-device will be reset if it is disconnected by mistake. If the user does not pair the network for this sub-device, it will be automatically connected to the previous gateway in three minutes.
Wi-Fi + Ethernet dual network pairing
The gateway supports flexible network pairing. You can pair devices by using a network cable or Wi-Fi-based EZ (SmartConfig) mode and AP (access point).
Linkage cross protocols and gateways
Provide local linkage capabilities across multiple gateways and protocols over a local area network (LAN), which are exclusive in the industry. Local linkage between various devices can be achieved over a LAN by presetting corresponding scenarios when devices are connected to the network.
Standard Zigbee 3.0 protocol
The gateway is developed based on the standard Zigbee 3.0 protocol. You can connect and manage your devices that are designed based on the standard Zigbee 3.0 protocol. Some non-standard functions can be implemented through custom development.
Full-process services
As an ecosystem co-builder, Tuya provides you with end-to-end services covering products, technologies, brands, marketing plans, and channels to enrich your product catalog.
Solution Functions
Add and control sub-devices
Sub-devices can be added both online or offline for device scenario linkage, local linkage, and group control.
Pegasus
With the gateway activated, you can press the button on the gateway to enter the pairing mode that lasts for one hour. During this period, the sub-devices that are ready to be paired will be added automatically. To exit the pairing mode, you only need to press the button again.
Project deployment
Project installation and deployment is supported. You can complete the local deployment of sub-devices without external network. In addition, scenario-specific configurations are supported. You can exit a specific scenario after the device deployment and scenario debugging. Users only need to configure the gateway to use locally deployed products with corresponding scenario configuration.
Switchover for failures
If you need to replace the gateway in case of hardware failure, you can use this function to switch to the standby gateway. Configurations of sub-devices and corresponding linkage scenarios configured in the original gateway can be synchronized to the standby gateway.
OTA services
Tuya provides over-the-air (OTA) update services for the entire gateway system, including the gateway device, Zigbee master control board, Zigbee modules, and the MCUs connected to the Zigbee module. You can update their software through OTA without dismantling them.
Wi-Fi + Ethernet dual network pairing
The gateway supports flexible network pairing. You can pair devices by using a network cable or Wi-Fi-based EZ (SmartConfig) mode and AP (access point).
Get Started
Communication capability
Wi-Fi+Ethernet+Zigbee
Recommendmodule
ZS4-IPEX
Development mode
Zero-coding development
Recommend control panel
Public panel
Power consumption type
General power consumption
Functional adaptation
Zigbee sub-device
Development Steps
1
Product Function Definition
2
App UI Design
3
Hardware Commision
4
Cloud Configuration
5
Trial and Mass Production
Module Solutions
TYZS4-IPEX ZigBee Module
Chip:EFR32MG1B232F256GM48-C0 Size:20.8×28×3.5mm Fit for:Home appliance, Gateway, etc